HOT TUB LEAK REPAIR
A hot tub serves as means of relaxation and comfort for the owner. A soak in a clean hot tub is one of the best types of relaxation you need after a hard day’s work. A soak in a clean hot tub has many benefits, unlike a dirty hot tub that is always a pain in the neck if not treated and cleaned properly.
IMPORTANCE OF MAINTAINING YOUR HOT TUB
Your hot tub needs to be maintained as regularly as possible so that you can enjoy all the benefits that come with owning a hot tub. The following are the reasons why you should maintain your hot tub;
- It is very beneficial to human health example:
- A good hot tub helps one to have a better sleep
- A good hot tub helps in weight loss
- A good hot tub helps to reduce stress
- A good hot tub helps in muscle relief
- A good hot tub helps to prevent cardiac problems and so many more.
- To keep it free from contaminants: maintenance of a good hot tub helps to make sure that the hot tub is free from contaminants like germs, bacteria, and other pathogens. A well-maintained hot tub also helps to prevent scum.
- To ensure good circulation of water: if your hot tub is not properly maintained, it may cause damages to the pump, jet, and other parts which control the circulation of water in your hot tub. Therefore, maintain your hot tub for a good circulation of water.
- To ensure prolonged efficiency: a good maintained hot tub tends to last and operate better and longer because when a hot tub has properly maintained, the filter, the jets, the heater, the Ozonator, the pump, the pillow, and other parts of the hot tub will last longer.
- To prevent leakage – when your hot tub is not properly maintained, it can lead to a lot of damages to several parts of the hot tub. When components like the pump, filter, or pipeline are damaged, it can lead to leakage in your hot tub.
PROBLEMS OF FAULTY HOT TUB
If you do not maintain and clean your hot tub properly and regularly, it can develop a lot of problems on your hot tub, some of which are:
- Heat failure: when your hot tub water is not as warm as it should, it indicates heat failure and low flow. If you are not sure that you have heat failure, you can test your electrical components using a multimeter. Most times, heat failure is caused by corrosion of the heating element due to water chemical imbalance. This imbalance is mostly due to a low PH level over time which trips the ground fault circuit interrupter (GCFI) breaker.
- Jets are not properly working: jets are like the workforce of your hot tub; they receive water from the pump. If your jets start malfunctioning, there is a probability that the pump is not functioning properly. You can solve this problem just by turning on your jet, then check for debris like mineral residue; also, check your pump to make sure it is functioning properly.
Also, open the access panel and airlock valves to release air from the purge system and line, allowing an easier water flow through the jet. Clogged filters can also cause your jet to malfunction; to solve this, you need to clean your filter properly and replace it when necessary.
- Control panel displaying error codes: when your hot tub is not properly maintained, it will severely affect your control panel and other parts of your hot tub. The hot tub control panel displays an error code to show something wrong with your hot tub. Sometimes, these error codes can be very confusing. These are some error code and their meanings.
- FLOW – this error code shows an improper flow in your hot tub or when your jets malfunction; this may be because of blockage or a clogged filter. Try cleaning your filter and also check the circulation of your pump.
- OH – this appears when your hot tub water is too hot to use. You will need to check your filter, your circulation system, and your temperature sensor to fix it. Also, ensure that your pump is not running for a long time.
- DRY – This error code means that there is insufficient water in your hot tub, affecting the heating element. You need to add water to your hot tub, ensure that the water is contaminants-free, then check your circulation system against debris.
- COOL – this error code appears when your hot tub’s actual water temperature is 20 degrees lower than your setting. To fix, allow the heater to run for 24 hours with your hot tub covered.
- SNA / SNB – This appears when the sensors or the circuit is having a problem, all you need to do is change the sensors or call an expert to check it out.
- Loud noises from the pump: when you begin to hear abnormal sounds like growling from your pump, it shows that there is a problem.
For a growling hot tub – it means that your pump is lacking water. To fix you need to remove clogs and open all the valves.
A squealing hot tub noise means that your bearing is worn out; you will need to lubricate it and later replace the bearing.
- Tripping of GFCI breaker – when your GFCI frequently trips, it means that you can spend a specific amount of time troubleshooting your hot tub. A malfunctioning GFCI breaker is easy to fix but, it requires electricity to troubleshoot and repair. If you think you cannot correct it, call an expert.
TIPS ON HOW TO WORK ON YOUR HOT TUB PROBLEM
- To troubleshoot the heater, check the thermostat and filter for damage.
- Ensure your pump-priming is functioning properly.
- Try to understand what your hot tub code errors mean.
- Secure and tighten any loose part of your hot tub.